EBW Bandsaw/Circular Saw Side Grinder (Mechanically Operated)
The EBW full flood side grinder is a machine of extremely stable construction that incorporates state of the art technology. The EBW is manufactured for the full flood side grinding of bandsaw and circular saw blades. Operated by mechanic control this machine features a two step feed speed motor. Variable speed frequency converter is available toffer feed speeds of 10 to 30 teeth per minute. the EBW greatly reduces grinding times and at the same time offers smoother wet ground surfaces. Optional extras include pnuematic blade clamping. the pnuemqatic clamping offers constant tooth position for all saw types, reduces machine adjustmernt times and eliminates the the use of linear guide slides.
SPECIFICATIONS
Voltage Supply 400V 3 Ph.N.
Load Amperage 6A.
Two Grind Motors 400V, 0.75kW.
Driving Motor 0.25kW.
Cooling Pump 0.12kW.
Tooth Shapes All common Shapes.
Tooth Pitch 15mm to 100mm.
Front Face Rake Angle 0 degree to 35 degree.
Clearance Angle Rake 0 degree to 20 degree.
Flank Clearance Angle 0 degree to 7 degree. (Face).
Flank Clearance Angle 0 degree to 7 degree (Back).
Feed Speed 12 teeth/min or 24 teeth/min
Variable Feed Speed Frequency converter by request 10 to 30 teeth/min
Grinding Wheel Cup form, Diametre 100mm, Bore 20mm
Grinding Spindle Speed 6000 RPM
Bandsaw Length from 6000mm
Bandsaw Width 50mm to 350mm
Bandsaw Thickness from 0.8mm
Circular Saw Diameter 180mm to 800mm
Circular Saw Diametre Special order (up to 1300mm)
