The SAA fully automaric stellite tipper is a well proven stellite tipping system with an excellent reputation. The stellite is welded onto the saw via the resistance welding method. The structural condition of the stellite is not changed during the welding process thereby avoiding cracks and holes in the stellite. The stellite is welded onto the saw vertically and the tip size can be adjusted in length from 4mm to 10mm. Stellite is picked up from the machine (5 rods, 1000mm long) and is then cut off by a cutting wheel. Pre shaped (square) stellite from 2.5mm to 6.5mm and round stellite from 3.2mm to 6.4mm diametre can be used. There is no need for elaborate saw preparation and grinding of the saw tip before tipping. New tips can be directly welded onto existing tips.
The SAA also features easy adjustments that allow bandsaw and circular saws to be tipped by the same machine. Automatic tipping and high frequency annealing of the bandsaw blades is carried out in one process. The SAA is equipped with an easy to use programmable control unit that eliminates the need for expert operation. The central height adjustment device of the SAA gives hassle free installation of saw blades. Due to the hydraulic system each working speed of each part of the machine can be adjusted individually.
Special options are available on request. A Carrousel, centrally adjustable in height for left and right running bandsaw blades is available as are single stands for heavy bandsaw blades. Additional supports for double toothed bandsaws and equipment for circular saw blades with centering devices for bore diameters from 22mm to 210mm is also available
